When a machine, equipment or service aid emits too much noise at a workstation and it is not possible to reduce this noise at the source, the best solution is usually to “enclose” this noise in an acoustic enclosure. We speak of boxes for the general case and of box when the box is very close to the machine.
When a machine, equipment or service aid emits too much noise at a workstation and it is not possible to reduce this noise at the source, the best solution is usually to “enclose” this noise in an acoustic enclosure. We speak of boxes for the general case and of box when the box is very close to the machine. These constructions effectively reduce airborne noise, i.e. noise transmitted through the air, especially at medium and high frequencies. They are a sustainable investment, which is combined with the investment made in production equipment.
The confinement of a space surrounding the machine also makes it possible to deal with heat emissions, steam and gas emissions, as well as dust generation at the source. The joint treatment of all these problems is a source of savings in terms of investment and operating costs.
Arrow picto For any type of machine, for treatment at the source of noise, for operator stations, with a dimensioning adapted to the on-site configuration.
Controlled inlet and outlet air treatment for an overall performance of
gain Pico Acoustic Arrow.
Control of air flows for optimum performance of insulated equipment.
Modular and removable panels. Three thicknesses available in standard sizes: 50, 70 and 100 mm.
Arrow picto Equipment possible: Handles, Glazing, Access, Ventilation, Removable panels, Automation Possibility of Arrow picto realizations.
Monobloc picto shaft.
Acoustic attenuation of 10 to 30 dB(A) depending on the thickness of the panel used.
If you have any questions, queries or simply want to contact us, we will be at your disposal.
